Question: Can I Shock My Pool 2 Days In A Row?

Should I shock my pool when I first fill it up?

At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off.

A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.

Now it’s time to keep the water hardness in check, otherwise known as alkalinity..

How long does it take for pH down to work in pool?

Answer: If it’s small pH adjustment then it is ok to swim after 1 hour of pool circulation. If a large quantity of acid is being added, wait 24 hours then re-test the pH to make sure the water is not too acidic.

Does pool shock kill algae?

Large amounts of algae may require you to add up to three doses of shock over a 36-hour period. When using large amounts of shock to kill algae, water may become cloudy. This should not be a problem, and the water should clear up after running the filter. Wait until the chlorine ppm has fallen below 5.0.

How long should you run filter after shocking pool?

24 hoursRun the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Can you swim the same day you shock a pool?

And how long do you have to wait before you can swim? You should wait one hour per pound of shock product added, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.

What do you do after you shock your pool?

Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.

Do you vacuum a pool on backwash or waste?

You can vacuum a pool on backwash, in theory at least, but it would have no benefit. The water would be pumped backwards through the filter, trapping much of the dirt, before passing out through the backwash hose. This dirt would then end up back in the pool once the pump was back on the filter setting.

Is it better to run a pool pump at night or day?

Running your pool pump during the day is good because that’s when the sun is out. UV rays are eating up the chlorine, so it is good to have the pump running to counteract the sun’s effects. A pro for night time would be that it’s off-peak utility hours. It’s cheaper to run the pool pump at night.

What happens if you put too much shock in a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

How long does it take for pool shock to work?

Follow package instructions, which will guide you in how long to wait after shocking before swimming. Heavy shocking with granular chlorine will generally require 24-48 hours before the chlorine level has dropped to safe swimming levels (below 5 ppm).

How long does it take a green pool to clear up after being treated?

24 hoursIf your pool is still green after 24 hours, there may be too much of the wrong chemicals, for example an excess of phosphate or cyanuric acid (“stabilizer”). It will take a while for the cloudiness to go away. For a sand filter, it will take a week or more.

What time of day should I shock my pool?

Sun Down – You’ll want to shock your pool in the evening when the sun has gone down. This gives your pool plenty of time during the night to free the chlorine and clean the water. In the morning, you should be able to enjoy your pool. If you shock your pool during the day, the sun’s UV rays will dissolve the chlorine.

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

What happens if you don’t backwash your pool?

Backwashing tips Backwashing can result in a loss of water. While this is unavoidable, you can minimize the amount of water you lose by not overdoing the backwashing process. Keep a close eye on the color of the water through the view glass and stop the minute it becomes clear.

How do you fix a green pool fast?

How to Fix a Green Pool FastVacuum Your Pool to Waste. … Brush the Pool Walls and Floor. … Test The Water For pH and Alkalinity. … Shock Your Pool with Chlorine to Kill Algae. … Run, Filter, Run! … Test, Balance, and Test Again.

How do I make my pool water crystal clear?

How to Make Your Pool Crystal Clear AgainKeep Up with pH and Chlorine Levels. Do you have a water testing device in your supply kit? … Run That Filter. It’s recommended that you run your filter for 8 to 10 hours a day when using your pool. … Skim, Skim, Skim. Yes, something that simple can be the trick to clear water. … Shock the Pool Once a Week.

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

What does Shocking the pool do?

“Shocking” refers to the process of adding chlorine or non-chlorine chemicals to your pool in order to raise the “free chlorine” level. The goal is to raise it to a point where contaminants such as algae, chloramines and bacteria are destroyed. … The free chlorine level of your pool measures zero.

How many times are you supposed to shock a pool?

When do you shock a pool? To be very specific, you should use it when combined chlorine exceeds 0.2. To generalize this we recommend using it at least once a week and no less than every other week. It is also good practice if you do not have an automatic pool cover, to shock after heavy rains.

Why did my pool turn green after I shocked it?

Copper can be the cause of a green swimming pool. … Swimming pool owners may find their pool water turns green after they shock it. When swimming pool water turns green after being shocked, it is generally because there are metal particles in the water.

Should I cover my pool every night?

Helps the Swimming Pool Retain Heat For a swimming pool that relies on the sun for heat, covering it at night can still make it warm enough to swim in the next day, instead of losing all the heat overnight when the temperatures drop.