Quick Answer: How Do I Know If I Have A 5.7 Vortec Engine?

Is the 5.7 Vortec a good engine?

The best-known and most-beloved has to be the “350” or 5.7-liter version; especially with Chevrolet and GMC trucks.

They are powerful, tough, reliable and it is relatively easy to “soup up” or increase their performance..

What is the most reliable Chevy engine?

Dependable Chevys: These are the Most Reliable Silverado Engines6.0-Liter V-8 Hybrid. … 6.0 L Vortec 6000 V8. … 5.3-Liter V-8. … 4.3-Liter V-6. … 6.2-Liter V-8. … Duramax 6.6-Liter Turbo-Diesel V-8.

How can you tell the difference between a 350 and a 305 Vortec?

By far the easiest way would be to pull a head and measure the bore. A 350 will have a 4 inch bore ( as would a 327 or a 302) while a 305 will have a 3.736 in bore. The difference is very pronounced once you know what you are looking at .

What kind of engine does my truck have?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

How can you tell the difference between 5.0 and 5.7 Vortec?

best bet is to get a flash light (and possibly a rag) and look down behind the motor right behind the drivers side head where the transmission meets to the block. there should be about 2″ of the block sticking out before it meets the transmission. being the truck is newer than 1986 it will say either “5.0” or “5.7”.

How much horsepower can you get out of a 5.7 Vortec?

You can install the 383 with Vortec heads on it. The HT383 that was available from GM uses Vortec L31 heads, the GMPP 383 shortblock and the Ramjet 350 roller cam with specs of 196°/206° duration at 0.050″ lift and 0.431″/0.451″ of lift on a 109° LSA produces 340 hp@4500 and 435 lb/ft of torque at 4000rpm.

What makes an engine a Vortec?

Vortec is a trademarked name for a line of small block engines for General Motors trucks. The name first appeared in a 1994 advertisement for the 1995 model year 4.3 L V6 that used “vortex technology” to create a vortex inside the combustion chamber, creating a better air/fuel atomization.

Why is a 327 better than a 350?

A 327 with it’s shorter stroke would need shorter gears so it can GET to its revs, where a 350, with its slightly longer stroke and more torque output will pull a little taller gear than the 327 will.

How many hours will a 5.3 Vortec last?

Re: Engine hours Idling the engine is running around half the speed of the engine compared to going down the highway. I would say it’s probably comparable to a truck with around 3500-4000 hours on it.

How do you tell if my motor is a 350 or 305?

Matching the suffix portion of the engine ID number properly identifies the engine as a 305 or 350 cubic-inch. If a bore measurement is to be taken, Popular Hot Rodding identifies the 305s small bore at 3.736 inches. Both the 305 and 350 have the same 3.48-inch stroke.

What vehicles have a 5.7 Vortec?

General Motors placed the 5.7 liter L31 Vortec in several of its trucks, including the Chevrolet C/K, the Cadillac Escalade and the GMC Yukon. The L31 was the last engine to come out of the first-generation of Chevy small blocks.

What is the difference between a 350 and 350 vortec?

Vortec heads instantly added 55 or more horsepower to a regular 350 head with the same displacement. Automotive enthusiasts are quick to note that the 350 and the 5.7 Vortec are essentially the same engine with the same displacement. The 350 designation is the cubic inch measurement that also translates to 5.7 liters.

What year is the best Chevy 350 engine?

L31 (2002) From a purely technical standpoint, the most recent version of the Chevy 350 would naturally be the best of the bunch. Marketed as the “Vortec 5700” engine, but known internally by the moniker of L31, this engine was used primarily in GM vans and trucks until 2002.

What was the last year for the 8.1 Vortec?

2009The 8.1 L was then produced until 2009 when it finally gave way to the small block 6.0 liter engine. This engine is no longer in production as the last was produced in 2009.

How do I know if I have a Vortec engine?

Another convenient way to identify your Vortec engine, a look at the 8th digit of your VIN number will easily identify what you have.T = 5.3L LM7.V= 4.8L LR4.Z = 5.3L L59.U = LQ4.N = LQ9.

What is so special about a Vortec engine?

The redesigned cylinder heads of a Vortec engine provides for improved combustion efficiency. The intake ports (reshaped) of the engine provides for better cylinder filling and fuel atomization by promoting higher air flow velocities to the combustion chambers via the ports.

What is the difference between LS and vortec?

The Vortec truck harness has a large portion up on top of the intake manifold, is supported by it, and is covered or hidden by the plastic engine cover. The LS engine harness is configured much differently and the intake manifold is exposed and uses valve covers to dress up the engine.

What can a 350 be bored out to?

Stretching a 350 to 383 inches has been a common practice for the best part of 20 years. The question here is, can we go more? In terms of bore diameter, there is not much room to go more than 30 over, although a sonic tester can find blocks good for as much as 60 over.